Upgrading Firmware

Upgrading Firmware

One of the nice features of Kobuki is that the user can update the firmware released by Yujin themselves. When a new firmware version is uploaded, this can be manually flashed onto the robot via usb without the need for special equipment like JTAG devices.

Follow the instructions matching the operating system you will connect to the robot for the flashing operation.


Leave a Reply

This post was last modified by leechangyong on 2016년 3월 11일.

This article has not been revised since publication.

This post was created by 거북이 on 2015년 7월 21일.

Do NOT follow this link or you will be banned from the site!